Sanislim: macerator pump for a washroom, shower cubicle or even a complete en suite shower room based on slimline sanitaryware.
Add a washroom, shower unit or even a complete en suite shower room based on slimline sanitaryware. Ideal for use in a basement or loft extension - or in any home improvement where conventional large bore pipework is impractical.
Sanislim takes waste from: A single WC Washbasin Shower Can be fitted with Sanialarm
Product Data: Sanislim
Motor
induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles.
Watts (Consumption)
400w
Electrical Supply
220-240V 50Hz
Flow rate at max head l/min
47
Horizontal Discharge
40 metres
Vertical Discharge
4 metres
Gravity fall on horizontal installations
1:100
Discharge Pipe Diameter
22mm
Materials
Polypropylene, C.R.P., stainless steel, Neoprene
Type of WC Pan (not included)
Short spigot 100mm HO outlet (BS EN 33/37)
Motor RPM
2800 RPM
Normal Running Time WC
10–20 secs approx or as required, to discharge shower etc
Dimensions (vertical height is measured from floor level)
435W x 315 O/H x 140D (requires 145mm behind spigot)
Technote
Designed to fit BS EN 33/37 WC pans. A clearance of 315mm is required from floor level to the underside of a close-coupled suite to accomodate the discharge elbow.
Items of this nature should not be disposed of through the domestic Saniflo macerator range as they are likely to cause a blockage. Our professional units Sanibest & Sanicubic are suitable for this type of product
As the function of the units is to pump waste and water away, it should not usually be necessary to dig up the floor to lay the discharge pipework. It is possible to run the pipework from low level to a higher level e.g. from a basement to ground floor level, or from 1st floor up into a roofspace and then join to a soil stack