WhoshouldIsee Tracks

Grease traps

Whether for above or below ground, for a temporary or permanent installation, SFA offers several sizes and types of product.

BIMObject

Download the 3D files of our products to integrate them into your project renderings.

Grease traps

Filter by

Install

Sanigrease T

Sanigrease T

The SANIGREASE T is a grease trap that can be installed for use in restaurant...

Sanigrease S

Sanigrease S

The SANIGREASE S can be installed in commercial kitchens: Small dimensions...
Sanigrease T24

Sanigrease T24

The SANIGREASE T24 is a small grease trap that can be installed under a sink...

Why install Sanigrease solution?

Whether for above or below ground, for a temporary or permanent installation, SFA offers several sizes and types of product.

Sanigrease T 24 

Sanigrease T 24 is a polyethylene grease trap designed for frost-free installation for mobile situations such as food trucks or mobile dishwashers. Sanigrease T 24, with its DN50 inlets and outlets, small footprint and light weight (4 kg), can be easily installed under a professional sink for occasional use. Sanigrease T 24 has a total capacity of 24 L and a maximum fat volume of 8 L. It must be emptied daily. 

Sanigrease T 40/60/80/100

The Sanigrease T 40/60/80/100 are grease traps designed for restaurant kitchen sinks. Due to their small footprint, their installation is quick and easy. The four height-adjustable feet make it easy to clean around the bins. Maintenance is made easy by the removable peel basket and its drain valves.

Sanigrease S 680 / S 1600 + 

Sanigrease S 680 and S 1600 are fat separators designed for commercial kitchens serving up to 440 meals/day. The DN110 inlets and outlets allow them to collect heavier residues, but at only 73 cm wide, they can pass easily through a door for comfortable handling. They are available in versions with a drain column and ventilation.

Sanigrease SU 1 / 1.5 / 2/3 / 4+

Grease traps are grease separators designed to be installed below ground. Available in several formats, with a Nominal Size from 1 to 4 (TN), they are in recyclable polyethylene produced by rotational moulding. These are models with a sludge trap for collecting heavy materials and are fitted with PVC inlet and outlet devices. They also have a cover with seal for pedestrian passage and this is locked by stainless steel screws and is made of a reinforced composite.