The Saniplus enables you to install an additional
bathroom with ease. With two inlets and a
greater tank capacity, the Saniplus can easily
deal with a WC, wash basin, bidet and even the
highest output power showers.
Why choose this product?
• One unit deals with the waste from
an additional bathroom
• Works with high output power showers
• Two side inlets and a greater tank capacity
Saniflo Descaler: For trouble free maintenance
Specifically created for use with Saniflo products
Laboratory formulated with phosphoric acid
Concentrated solution for optimum cleaning power
Regular usage prolongs unit life and maintains efficiency
Harmless to septic tank op
SANIALARM : Suitable for new or existing Saniflo installations.
SaniAlarm is quickly fitted onto the lid of the Saniflo unit. *Not suitable for use with Sanicom, Sanicondens, Sanicompact and Sanicubic.
1- Insert the Batteries (not supplied) in the case.
2- Carefully drill a 10mm hole in the lid of the unit where indicated in the instructions.
3- Spread some silicone grease around the plunger tube and insert it through the lid
4-Fit the SaniAlarm on top of the Plunger tube.
5-Switch to the ON position.
|Dimensions (Height x Width x Depth)||512 x 181 x 270|
|Discharge Pipe Diameter (mm)||22 / 28 / 32|
|Electrical Supply (V/Hz)||220-240 / 50|
|Horizontal Discharge (m)||100|
|Min. Gravity Fall on Horizontal Run||3|
|Motor Speed (RPM)||2800|
|Vertical Discharge (m)||5|